PL1104X XGPON Home Gateway

PL1104X XGPON home gateway is a valuable integrated access device for the next generation of smart home networks and intelligent all-optical access solutions. Our XGPON home gateway is a home terminal product that combines XGPON, VoIP, and high-speed WiFi6. It can be used as a multi-service access and control center for the home, providing users with high-speed Internet access, voice call services, and WIFI.

PL1104X XGPON Home Gateway Funcitons

–XGPON

• XGPON, ITU-T G.987 compliant 9.98328G Downstream and 2.48832G Upstream;
• Service processing functions such as traffic management, QoS, multicast, encryption and decryption, service flow classification, bridging, NAT/NAPT, gateway processing areprovided;
• Supports L2/L3 multicast and VLAN conversion;
• Supports 16KB jumbo frames

–WiFi

• WiFi protocol: IEEE 802.11b/G/N/AC/AX;
• 4GHz band transmit power(including antenna gain) default 100mW, adjustable range 20-100MW, can be adjusted by percentage up to 100mW;
• 5GHz band transmit power(including antenna gain) default 200mW, adjustable range 40-200mW, adjustableby percentage up to 200mW;
• Automatic rate regulation;
• Recognise when the STA is ina power saving state,and cache relevant data,wake-up the STA with a Beacon frame, and send the cached data;
• Optionally supports configuration of Beacon frame sending interval and DTIM interval;
• Support dual-antenna MIMO (2*2) external 4pcs, antenna gain:5dBi;
• 4G 11n 2X2 with atransmit power of nomore than 100mW,and an open are acoverage of more than 100m. The actual access rate at 100m is not less than 10% of the WLAN throughput.and at least 10Mbps if 10% of the throughput is less than 10Mbps;
• 5G 11ac 2X2 with athransmit power of no morethan 200mW,and an open are acoverage of more than 100m. The actual access rate at 100m is not less than 10% of the WLAN throughput. And at least 10Mbps if 10% of the throughput is less than 10Mbps;
• WLAN shall be able to penetrate one reinforced concrete wall or two ordinary brick walls (non-reinforced concrete), and the actual access rate shall not be less than 10% of the WLAN throughput. When the throughput is less than 10Mbps, it shall reach at least10Mbps.

–Voice Interface

• Supports one voice processing;
• Supports various prompt tone generation;
• Support sencoding and decoding G.711, G.722, G.729, T38,etc;
• Supports the FoIP function;
• Supports the Fax/Modem VBD (Voice Band Data) function;
• Functions such as echo suppression, speech activity detection, comfortable background noise, speech frame compensation are supported;
• Support the functions of VoIP statistics and fault diagnosis;
• VoIP codec mode can be configured separately for each POTS route, and codec priority order and packaging interval can beconfigured;
• Support the functions of detection, generation, transmission and recovery of DTMF;
• Generation of Support FSK with calling number display function;
• Supportstwo-stage dialing and RFC2833 intra-band transmission of DTMF tone;
• Supports the Tripartite meeting function;

–Data Services

• Multiple Methods of High-speed Internet Access
• Wire speed transmission of all packet length rangedata
• Advanced data functions, such as VLAN tag processing, flow classification and packet filtering
• Built-in Three-layer routing and localgateway

–Multicast Video Access Service

• Support for data-based video content delivery (via multicast or unicast).
• Support for the IGMP snooping function, providing further application optimization. When the IGMP snooping function is enabled, members joining and leaving multicast groups are monitored on the Ethernet port for selective transmission of multicast data streams.

–Ethernet Interface Functions

• Ethernet portauto-negotiation
• MDI/MDIX Automatic detection function
• Hardware Based Priority Queue Support Service Classification (CoS) for Upstream and Downstream Directions
• L2, IPv4 NAT, IPv6 3/5-Tuplebridge
• Virtual exchange based on TR-156 and CTC
• Port-based VLAN labeling andde-labeling
• Support IP ToS/DSCP to 802.1Pmapping
• Support service classification based on UNI, VLAN-ID, 802.1Pbit,ToS/DSCP
• 1P labeling andre-labeling
• IGMP v2 / v3snooping
• Broadcast/multicast rate limit

–Gateway Feature

• Support LANconnection
• DHCP
• Staticconnection
• Support automatic address allocation on the LANside
• DNSrelay
• Network Address Translation (NAT)/Network Address Port Translation(NAPT)
• PortForwarding
• StaticRouting
• Traffic classification and QoS based on the identification of Layers 3 and4
• Access Control List(ACL)
• VPN transparent transmission based on PPTP, L2TP and IPSec protocols is supported
• Firewall
• Application Layer Gateway(ALG)
• DMZ
• Dynamic Domain Name Service(DDNS)
• Support the NTP protocol
• General Plug and Play(UPnP)
• IGMPagent

–Operation, Management and Maintenance

• Download, activate and restart remote software image through OAM/OMCI;
• The function of software integrity check and automatic rollback after upgrade is supported with two software mirror partitions.
• Develop the remote management function of TR-069 according to user requirements;

XGPON Home Gateway Specification

Welcome to enquiry our PL1104X XGPON Home Gateway.